Mclaren Senna 75892 mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Lego Speed Champions Mclaren Senna 75892.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the mount from the Porsche 963 76916 and remade it. The base was too big for the senna as the tires and wheels it the base and it would not sit fully down. I also wanted the prongs on the mount to be centered rather than offset. It think the difference in size of the two set is why the original mount does not quite work. I printed this with Black Creality PETG on my Creality CR-10 Smart Pro. Settings below.
Skirt
layer height .20
line width .40
Wall Thickness 1.2
top/bottom thickness .84
grid infil - 20%
55mm/s print speed
25.0mm/s initial layer speed
240* nozzle and 80* bed temp with enclosure.
Triangle supports at 10 percent worked really good for this mount and the others.
Retraction 5.0mm at 45.0mm speed
Used estimated 5.50M of material.