1 / 4
Jumper T20/T20S Nano external module adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nano module adapter for jumper t20/ jumper t20s.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 109
- Makes
- 0
- Views
- 1,003
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Will not fit Gemini version because heatsink is different.
To actually make this, you will also need connector PCB. This model is created for one like in the pictures – “Jumper T-Pro external module adapter” on aliexpress or this. The wiring in this adapter is not compatible with T20 external port pinout so you will have to re-solder and rearrange wires like shown in another picture. You will also need at least 2 M1.5x3 screws to secure adapter to heatsink.
I recommend printing this with 0.12mm layer height and temperature resistant filament like PETG or ABS.