Drawer Catch for @DiTechFab's Desktop Mini Toolbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevents the drawers from sliding completely out
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 99
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This drawer catch can be used on @DiTechFab's Mini Toolbox to prevent the drawers from accidentally sliding completely out.
The design allows the drawers to be removed when desired by pushing up on the spring clip, and installed with a satisfying click.
An installation jig is provided to help glue the catch in place. Just slide the long end fully into a slot and then slide upwards. Glue the catch in place as shown in the photo
Recommend to print in ABS/ASA or PETG for sufficient springiness. You probably only need one side for each drawer, but mirror for the other side if you like.