Mini Gear Fidget Spinner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small gear fidget spinner for fidgeting.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 112
- Makes
- 1
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Small gear fidget spinner for fidgeting.
.stl & .3mf files available.
Print Notes:
Material: PLA.
Layer height: 0.16mm
Infill: 15% infill (Important: do not over tighten the threaded thumb screws if using a low infill.
Supports: none.
Post printing (important):
- For smooth spinning sand off any seams or bumps on all running surfaces.
- Check threads screw together before assembling. Sand and smooth thread as required.
Assembly: see picture of the exploded diagram. Important: align the two halves of the gear (using the small pins) by matching the 1 to the 1 and the 2 to the 2 on each half. The pins are a tight fit, so you do not have to use glue.
Check out my other models here 👀
See my other fidget models here 👀
Hope you enjoy and happy printing 😎