Self-watering Flower Pot / Vase Castle Tower
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.43 net (excluding VAT)
For file: Self-watering Vase 50% Inside Plate_0.2mm_PLA_MK3S_32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 31.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I remodeled a Self-watering Flower Pot / Vase Castle Tower for everyone, who need a cool Flower Pot or Vase :-)
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 134
- Makes
- 1
- Views
- 785
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remodeled a Self-watering Flower Pot / Vase Castle Tower for everyone, who need a cool Flower Pot or Vase :-)
I took and remodeled one original model by Phat3R from Printables and made it into a functional Self-watering Flower Pot / Vase Castle Tower.
The flower pot / vase can also be used as a universal storage place for example for stationery, or many others…
I created 2 sizes of my new model.
- Self-watering Vase Castle Tower is original size model with higgest body of Tower. Model have a door with windows and blazon.
- Self-watering Vase Castle Tower Lower is little bit lower than original model. Model have a door with windows and blazon.
- Self-watering Flower Pot Castle Tower is lowest model. Model have a door with windows, but dont have a blazon.
- All of this models can combinate with Self-watering Vase I Pot Inside Plate to create a functional Self-watering Flower Pot / Vase Castle Tower.
- Self-watering Vase 50% Castle Tower with Self-watering Vase 50% Inside Plate will create a functional Original Tower Vase with door, windows and blazon in 50% size.
After printing You don't have to use any sandpaper, glue, screews or anything like that, but if You want a better look of Self-watering Flower Pot / Vase Castle Tower, You must paint it. I recomend a acrylic colours and permanent maker. It works well.
I printed a Self-watering Vase 50% Castle Tower with Self-watering Vase 50% Inside Plate and everthing is work well. Photo is in Comments.
But if You need some different sizes, You can take my models and resize it as You need.