1 / 3
Racktime Snapit v1 (tem)plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use it to drill holes on the desired location in any bag/box/crate you want to attach with a Snapit v1, or reinforce it.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning: this is for Snapit v1 ✔, not Snapit v2 ❌.
The base model is 120mm wide to fit the carrier side adapter.
The 128mm wide models are to fit the width when and where the washers are in place.
If you print the plates just to know where to drill, you might want to add some hole(s) in the middle to save filament.
If you print the plate as a reinforcement, print it fully, and add thickness. The files have 1.2mm thickness, use at least 4mm.