IKEA Samla 22l Partition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKEA Samla 22l box partitions for better organization.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 63
- Makes
- 0
- Views
- 478
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I needed to separate things in the IKEA Samla 22l box. I found the 3D model of the box, so it was a matter of a few minutes.
Print instructions:
- Material: PETG
- Layer: 0,2 mm
- Perimeters: 2
- Infill: 15
- Supports: No
- Brim: No
This model does not require any special settings, more details in the attached 3MF file.
Assembly instructions:
Unfortunately, IKEA Samla boxes have a relatively large manufacturing tolerance range. If you want to be sure of the functionality of my model, first print a test template on paper, stick it on cardboard and try it in your box. PDF file is included.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
Unfortunately, this model with its dimensions will not fit on the printing plate of my Prusa MK4. Therefore, I have also prepared a version divided into two parts with an admitted division. Both parts need to be glued, I used my favourite two-component epoxy glue.
And of course, for owners of 3D printers with a larger print plate, a one-piece version is also available 😉.
Current model version:
- Standard Version: V01
- Two Part Version: V01
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.
Print visions, create reality!