Turbo Fan / Jet Fan - Magnetic Nozzle (15mm)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.96 – €1.17 net (excluding VAT)
For file: Turbo Fan - Jet v3 (15mm)_0.4n_0.15mm_PLA_MK4IS_1h8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.07 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is alternative nozzle for ZBESYQ X3 aka CAER Mini
- Rating
- 5 / 5
- Likes
- 135
- Downloads
- 856
- Makes
- 6
- Views
- 8,080
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an alternative nozzle for a Turbo Fan/Jet Fan, featuring much higher nozzle pressure than the stock version.
In my opinion, it offers the perfect balance between pressure and airflow.
There's a small notch on one side, which should face up to align with the openings on the fan.
Developed and tested on the ZBESYQ X3 (product markings), also known as the CAER Mini 3 Gear (product listing).
https://www.aliexpress.com/item/1005006916970364.html
The base of the nozzle is 38.6mm wide. As the first step in verifying compatibility, measure the size of your fan's baseplate.
IMPORTANT: This model requires the insertion of a 10x3 mm magnet. It’s possible to use a magnet with a diameter of up to 15 mm. Use the OnShape link below to adjust the "Sketch 5" drawing for the diameter and "Extrude 4" for the height.
Feel free to adapt my design to your model or preferred magnet dimension:
https://cad.onshape.com/documents/c1c763c2bf5fe3463457910b/w/83bf77d522a0f08718b0f8a0/e/756b9760b29e8f9f5535c2be?renderMode=0&uiState=66bfa8a95c97bf1d9d9b69de