Mid Century MagSafe Iphone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed an Iphone MagSafe stand inspired by mid century aesthetic!
- Rating
- 3.667 / 5
- Likes
- 28
- Downloads
- 97
- Makes
- 4
- Views
- 585
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed an Iphone MagSafe stand inspired by mid century aesthetic!
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
.2mm Layer Height
Infill:
15-20%
Notes:
Print Settings
-.2mm layer height
-15-20% infill
-3 perimeters
-Support on Bottom and Top
Assembly
-Print all parts
-Snake the magsafe charger cord through the Top and press fit the dish in place with the cord facing down
-Snake the cord through the Bottom
-Screw in the connector through the bottom
-Once all parts are together you can spin the top to wind the cable or pull on the end to unwind the cable!
Category: Mobile Phone