1 / 3
Baader Knob - Stronghold Clamb for Pan EQ prism — image 1
1 / 3

Baader Knob - Stronghold Clamb for Pan EQ prism

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Baader delivers a 3D tool for the PAN clambs and stronghold: https://www.baader-planetarium.com/de/3d-gedruckter-…

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
35
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Also see: https://www.printables.com/model/1888809-baader-clamb-knob-stronghold-pan-eq

Baader delivers a 3D tool for the PAN clambs and stronghold: https://www.baader-planetarium.com/de/3d-gedruckter-ringschl%C3%BCssel-f%C3%BCr-baader-pan-eq-klemmen.html

I created a version with fusion 360 which can stay permanentaly on the original knob.

THIS IS (and must be) VERY TIGHT: please test. If not, the knob will slide through.

I use a rubber hammer (!) to drive the part onto the original knob (hammer carefully! - not much force needed). BUT, you will then NOT be able to remove the part without force or to destroy the plastic of the part (there is also no reason to do so).

Friendly reminder: I am not responible if you damage your parts :-)

Two versions

  1. full cover (see picture - this is for a Baader Pan EQ V190)

  2. smaller version for stronghold (see picture)

The fusion 360 file contains both versions.

Printing

  1. Print with a strong material (PLA oder Polymake PLA Max)

  2. Print wit 0.2 fine (not draft)

Infill 30 is enough Print Settings

Printer Brand:

MK3

Printer:

Prusa i3

**Rafts:**

No

Supports:

No

**Resolution:**

200

Infill:

30

**Filament:** PolyMaker Polymax (Strong) PLA black

Category: Physics & Astronomy

Tags