Drying and storage rack for Medela and Philips Avant baby bottles and caps with teats
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2x bottles (up to 250 ml.) + 2 caps with teats (Philips Avant) 2x bottles (up to 250 ml.) + 3 caps with teats (Medela)
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 55
- Makes
- 0
- Views
- 913
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a drying and storage rack for baby bottles.
V2 is for Philips Avant bottles and takes two bottles (max size 250 ml.) and two caps and teats (aka. two full bottle sets)
V3 is for Medela bottles and takes two bottles (max size 250 ml.) and three caps and teats (aka. two full bottle sets and an extra cap)
Most of the magic is done in the slicer, so be sure to check the .3mf files even if you would like to slice it yourself. (It slices the middle section with no top or bottom layers to only have the honeycomb infill, to save filament)
It also has a supportive fin, as the first version (seen to the left in the pictures) had trouble holding up the caps in a satisfactory manner.
The V3 (Medela) is the pink-yellow mixed rack in the middle of the pictures. The rightmost rack is the V2, for the Philips Avant.
Feel free to ask questions or remix the models if you'd like!