1 / 2
Strong Single and Double Pulley for rope
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No bearings. Pulley for up to 12mm ropes. Only three printed parts and three M8 bolts per pulley.
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 188
- Makes
- 1
- Views
- 1,227
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Strong Single and Double Pulley for rope
This design is specifically optimized for strength, with bolts that help distribute the load away from the plastic at the end holes (compressing towards the bolt instead of pulling from).
Additional hardware
- 3x M8 x 40 (single wheel pulley) or 3x M8 x 60 (double wheel pulley). The frame can be used with regular or carriage bolts (cup square neck)
- 1x M8 washer for use between the wheels for the double pulley.
Printing
Two frames per pulley. Print flat side down. Use many walls for strength. The example is printed using 8 walls (PLA).
Perfect for use with this compact winch for 6mm rope.