Multi-Colored PEPSI Logo with a single nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single Nozzle and Manual Filament swaps to create a "Pepsi Puck"
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Using a single nozzle and preforming manual filament swaps, create a 3-colored pepsi logo.
First make sure all parts line up in Prusaslicer. Delete the white part and another one, leaving only the red or blue. Print it out in its respective color, but leave the part on the build plate. Then, “undo” the deletion of the other two bodies, and start the next print, but this time with the OTHER color (that is not white). Print it out in it's respective color, but leave it on the build plate. Finally, “undo” and delete the red and blue models, and print the final piece in white over top of the blue and red that are on the build plate.