1 / 3
Soap and Sponge Dish
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store bar soap or sponges so they drain into the sink as they air-dry.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 103
- Makes
- 0
- Views
- 642
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Looking for a clean place to put sponges or soap to dry, I had a hard time finding something that was simple and clean.
This is a refinement of my original design and builds on learnings from the first version:
- make it easy to rinse clean
- add space for it to dry underneath
- add a lip to keep it at the edge of the sink
Recommend printing with a 0.8mm nozzle, 0.4mm layer height, and 1.999mm extrusion width. This produces a strong part when printed in “vase mode”. See the included .3mf file for a good configuration. It can also be printed with a standard 0.4mm nozzle and 0.2 or 0.3mm layer height, but I have not tried it.