1 / 2
Another 3d Print On The Wall
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 150x150 sized print that is a based on the famous song Another Brick In The Wall and the cover of it's album
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printed with BambuLab A1
size: 150mm x 150mm
nozzle: 0.2
wall generator: arachne
wall loops: 1
infill: 100%
layer height: 0.04mm
initial layer height: 0.1mm
detect narrow internal solid infill: disabled
ensure vertical shell thickness: disabled
Print time: almost 11h.
The stl takes a while to slice, so don't panic if the progress bar doesn't move for a while (mine was stuck on 15% for a few minutes) :p