lowered MMU3 frame holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
lowered MMU3 frame holder at 30deg to provide more overhead clearance, e.g. for LACK enclosure
- Rating
- 3.5 / 5
- Likes
- 14
- Downloads
- 54
- Makes
- 1
- Views
- 412
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This is a remix of the original mmu3 frame holder in order to gain slightly more overhead clearance above mmu3 body. The selector is partially hidden behind the selector, but still can freely move to both ends.
I don't remember the original height, but this version results in roughly 8cm to 9cm height above the frame.
The angle is 30deg, which results in a smooth curve for the PTFE tubes. For now, I ditched the slots for holding the mmu3 in maintenance position, that might come in the future - or not.
I haven't checked yet for full print height, use at your own risk (particularly the PTFE tube to the extruder might still be constraint when using LACK)
------------------------
UPDATE 2024-09-01:
Per request, I lowered the frame for additional 5mm (see respective folder ‘further modifications’). Check with your print-height before printing high models, particularly the PTFE tube to the extruder might be still constraint when using LACK