1 / 4
sanding block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made this years ago, still using it :)
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 88
- Makes
- 0
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Needs 2x M4 nut, M4 threaded rod ~32mm and optionally a washer.
Recommend 2mm thick rubber, strong foam or felt on the outside (160x35mm).
One of the nuts should be inserted in the knob: pause at the appropriate layer and put the nut in, continue print.
Other nut must be pressed into the slot of the body.
I cut my sanding paper 35 x 200mm.
Print Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15