Raspberry Pi Camera Module 3 bed mount for MK3S
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.43 – €0.53 net (excluding VAT)
For file: Pi Camera Module 3_PETG_32m21s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Supporto fotocamera compatibile con Raspberry Camera Module 3.
- Rating
- 3 / 5
- Likes
- 12
- Downloads
- 177
- Makes
- 2
- Views
- 800
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm.
Aggiornamento 07/09/2024
Aggiornati i seguenti files:
- Pi Camera Module 3 case - Front.stl
- Pi Camera Module 3 case - Back.stl
- Cradle.stl
- Pi Camera Module 3_PETG_1h45m.gcode
- Pi Camera Module 3_PETG_32m21s.gcode
Descrizione dell'aggiornamento
E' stata fornita una maggiore tolleranza al contenitore della fotocamera al fine di poterla rimuovere più facilmente dallo stesso. Sempre a tale scopo è stata ridisegnata la feritoia per l'uscita del flat cable.
Buone stampe!