KNOBS for Scalable Field Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This are DIY knobs for Edgar Kech's wonderful camera. They fit the 4X5 Scalable Field Camera…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 57
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This are DIY knobs for Edgar Kech's wonderful camera. They fit the 4X5 Scalable Field Camera (https://github.com/edgarkech/scalable_field_camera). Surcing knurled bolts can be tricky, they are too small and not adapt to my finger. I wanted them to be plastic fantastic, joyful, colorful, playful, large and shiny.
All printed PLA, bolts held in place with a drop of superglue.
F_rise needs supports (very thin but needed), an M5x16 cyl head bolt, F_rise_lock decoration part to print in contrasting colour. (everything 2X)
F_rise needs supports, an M5x20 cyl head bolt. (everything 2X)
MAIN are the two main body locking knobs, M5x10x7 heat insert and the "Main_Lock"decoration part, or cut yourself a piece of vinyl ring (outer diameter 26mm, inner 12) (everything 2X)
F_swing is a flat thin knob, that relies on a conic flathead M5x16 bolt (can be 20mm) and on a hexagonal nut, using the same F_rise_lock decoration. You will use only one.
F_tripodbase uses an M5x12 flathead (be precise, please). It's made not to protrude from the arca-swiss base, so you can place the camera flat on a table or flat surface without rumbling around! 1X.
Tripod_plate_mod is a REMIX from E.Kech design, to accommodate a FAR LARGER SCREW KNOB. It uses an M5x12 flathead (be precise, please). As for the small one, IT STAYS FLAT.
Category: Camera