1 / 1
SE/KE Plate/Adapter Combo vibration sensor quick release mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Part needs to be printed with support. I did 35% gyroid infill and 2walls with tree supports.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 78
- Makes
- 3
- Views
- 704
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
this part fits the adapter plate mod for needitmakit's linier rail upgrade for the KE/SE printers it clears the print bed by about 1mm on the stock standoffs so clearances are tight. its not the most refined design but it sure is functional. it uses the main face on the adapter plate and the sides to lock in. I used 2 3mm x 5mm screws and of course some 3mm x 5mm x 5mm brass inserts in the adapter plate. washers are optional I used some shims as washers just for safty sake.