Big Purple Crayon Tote - Large Capacity
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.58 – €1.93 net (excluding VAT)
For file: Tote Knob-3_0.2mm_PLA_MK3S_1h45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.75 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Large capacity carrying tote for crayons. Holds 320 + standard size crayons comfortably.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 35
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Big Purple Crayon Tote Caddy - Large Capacity
My granddaughter saw a crayon storage tote in the store and asked if I could make her one like it.
The exterior of the model appears as upright crayons encircling a center post, with a handle on top for carrying.
The storage area is divided into 5 equal segments, each segment has a capacity to hold a whole 64 piece standard size crayon set (64 X 5= 320 crayons!!). Large sized crayons will also fit the model, but with a little less total capacity. The bottom of the storage area is also tapered toward the center a bit so that the crayons in the middle are a little higher than those on the outer brim of the circle.
I printed in purple silk PLA; 0.4 nozzle; 15%infill - 0.20mm layers. No supports required for the main body or the separately printed Top Knob.
I included a heat-sink provision to use to fasten the carrying knob to the top post (M3 hex cap screw - Mine was 24mm, but using one slightly shorter may also work fine). This allows you to remove the knob more easily in case the items stored within are a little taller (where the knob might get in the way of removing the stored items).
I suppose the model can be used for a variety of different storage needs, but it is definitely themed for crayon storage - Yes - big purple ones!!
When examining the store model of a similar design, the center post and top handles were fixed together, and seemed a bit weak/prone to bending/breaking. Printing in PLA was desirably rigid for what I had in mind.
Hope you enjoy - I'll deliver to my granddaughter later this week!!