1 / 4
Dewalt Battery to Milwaukee Tools adaptor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use Dewalt cordless tool batteries with Milwaukee tool skins
- Rating
- 4.5 / 5
- Likes
- 106
- Downloads
- 671
- Makes
- 2
- Views
- 3,675
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Cordless tool battery adapter.
Dewalt Battery to Milwaukee skin tools
Extra hardware
- 6mm male spade connector x2
- wire
- female fuse terminal x3
- M3 x10mm bolt & Hex nut x2
- 470k resistor
- spring (0.5mm, 35mm, 5mm) a retractable pen spring will probably work too
Prep spade connectors like this, flatten out the shoulders if you can
Basic assembly procedure
- remove spade terminal sheath and crimp to wires, flatten it out
- install spring and side buttons into top
- install wired spade terminals into base and thread into the top
- bring top an bottom together, pulling wires through as you go
- use nuts and bolts to bind the top and bottom together
- trim wires appropriately to allow female terminals to fit into their slots
- crimp female terminals, remembering to include the resistor into the positive terminal
- push terminals into place, I used hot glue to cover up the resistor
Reach out if you need further clarification
EDIT 28-3-25
Added V2 of the top that moves the female terminals a bit closer (4mm) to the male ones
If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!