1 / 23
Buddy Fan Enclosure — image 1
1 / 23

Buddy Fan Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fan holder to stop 'Buddy Overheat' problem

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
112
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

***<font color="blue">Buddy Fan Enclosure</font>***
========================================
Having upgraded to the Prusa MK4, & when printing Prusament PETG, I  have suffered many “Buddy Overheat Error”s.

This is my design solution for that.

First, place a Heatsink over the buddy IC & then use this object to place a fan over the IC & use a louver & air intakes from below,
To bring fresh air over the heatsink.

I’ve not had a single heat error since installing this

**<font color="green">My previous designs here:</font>**
**<font color="green">**

Pill Remover.                           https://www.thingiverse.com/thing:6624043
Tools Drawer                           https://www.thingiverse.com/thing:6472021
Autens Battery Charger          https://www.thingiverse.com/thing:6367884
TS80P High Current Supply   https://www.thingiverse.com/thing:6367814
Power Tower                           https://www.thingiverse.com/thing:6345056
Parts Caroursel                       https://www.thingiverse.com/thing:5343593
Dremel Jig                               https://www.thingiverse.com/thing:5267056
Containers for Carousel          https://www.thingiverse.com/thing:5199867
Micro-Pump Housing.             https://www.thingiverse.com/thing:5164094
Wire Bobbin.                           https://www.thingiverse.com/thing:4946929
Flux Funnel.                            https://www.thingiverse.com/thing:4946257
Large Spool Holder.                https://www.thingiverse.com/thing:4816080
Tush Linear Bearings.             https://www.thingiverse.com/thing:4815574
T-962 Modification.                  https://www.thingiverse.com/thing:4760915
Desiccant Funnel.                    https://www.thingiverse.com/thing:4716424
Arduino Mega Case.                https://www.thingiverse.com/thing:4291794
Sandpaper Holder.                   https://www.thingiverse.com/thing:4213700
Gear Driven TUSH.                  https://www.thingiverse.com/thing:4196767
Tight-Fitting Container.             https://www.thingiverse.com/thing:4158760
Power Supply Case.                https://www.thingiverse.com/thing:4073804
</font>**

<font color="blue"><b>After printing all parts<b>

<font color="green">**Parts List:**

1 x Noctua 40mm x 10mm 12v fan
1 x MP1584 DC -> DC Buck Converter
1 x Miniature Switch
1 x Rectangular LED
4 x M3 x 20r stainless steel bolt
8 x M3 x 10r stainless steel bolt
12 x M3 stainless steel hex nut
1 x M3 x 8 grub screw

I may at a later time use a MosFET & temperature sensor to turn the fan on automatically, 
but at this stage, this is the simplest method.

 

Tags