Rugged Box for 8BitDo SN30 Pro Case (Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another Rugged Box remix, but this time to hold SN30 Pro gamepads and includes a Super Nintendo logo on the lid
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 113
- Makes
- 0
- Views
- 641
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed in PLA with ‘gyroid’ infill at 15% which is definitely strong enough for my use - though ‘grid’ or similar would probably be a better choice considering the direction it's likely to have pressure. A also added 100% modifiers at the joints to give them some extra strength.
Print the logo upside down so the surface is nice and smooth.
Definitely use supports on the top so the SNES logo prints well and allows the inset to fit correctly - it should be fine if your printer is well-tuned.
I also recommend 3 wall loops and top/bottom layers, you could also print at a higher temp for the latches to make them stronger