1 / 2
Locking lever for the Dolica Proline tripod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement lock lever for the Dolica Proline Tripod
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
I model this locking lever to replace two broken levers on my Dolica Proline Tripod.
The hole in the lever is supposed to be 4.3mm but I had a hard time printing it on the exact measurements. On my prints, the clearance was consistently below 4mm. After some trying and error, I settled on heating up the tripod pin and pre-inserting it so I could expand the hole for the 4mm and guarantee an easier insertion.