1 / 1

PetCycle v1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adigo18

@Adigo18_2034655

Filament from bottles.

Rating: 0 / 5
Likes: 4
Downloads: 41
Makes: 0
Views: 365
Reviews: 0

Updated at source: Jan 23, 2025

Model information

Source: Printables
Category: Accessories
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Files (17)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (3)

Pet1 filament makeing machine. Based on arduino 2560

Parts needed:
-Ramps+lcd+12vpowesupply
-2xnema17
-Endstop
-Heatblock thermistor heater standard nozzle drilled with 1.75drillbit, Heatblock also need to be drilled with -m8 chamfer
-6xbearings 608zz
-Few m8 bolts and nuts, few m3/m4 bolts and nuts
-One angle bracket(fastener)
-Piece of wood (410x70x40mm)

Nozzle need to be drilled with drill bit, I am working with 1.75drillbit, but 1.6 should be good. I prefer and recomend 1.75 drillbit. 2x bearings need to be grinded(you have to make it flat, then you have to make it sharp, later i will post video).