Auto Filament joiner
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.59 – €0.72 net (excluding VAT)
For file: pet joiner v1.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.65 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Try and share your opinion.
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 145
- Makes
- 0
- Views
- 1,464
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Needed parts:
Arduino2560+ramps+reprap smart controller+power supply 12v+2xnema17 with min.a4988
-2x radiator from ender3
-2xheatbreak all-metal(drilled with 2.6mm drill bit for around 10mm)
-2xextruder mechanism from ender3
-1xheatblock with Heater and thermistor
-2x e3d v6 fan 30*30*10mm
-1x 5015fan 12v
-1xptfe tube long for 2cm outside diameter 2.6, inner 1.8.
-1xstandard ptfe tube 1.9-4mm
-Alot of screws
For arduino you have to prepare marlin firmware (standard, like for printer will be enought)
Here is also gcode for “join filament” named “pet joiner v1.gcode”
Please share your results, Soon more information with pictrues.
Updates:
23.09.2024-added radiator housing with ventilation holes and threaded insert for radiator.
29,09,2024-Added marlin firmware named “joiner”
Here you can look how does it work: