1 / 3
Pedal plates for Temple Audio templeboard guitar pedalboard — image 1
1 / 3

Pedal plates for Temple Audio templeboard guitar pedalboard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable equivalents of the mounting plates used with Temple Audio's pedalboard.

Rating
5 / 5
Likes
40
Downloads
309
Makes
0
Views
1,593
Reviews
1

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial

These are 3D printable equivalents of the mounting plates used with Temple Audio's pedalboard. Using some mounting tape, you attach one (or more) of these to a guitar pedal. The mounting plate alignment nubs and center screw go through the holes in the pedalboard. Use the included nut to secure the pedal (finger tight only). This allows pedals to easily be repositioned as necessary.

Quick tip on attachment - I find it easier to first secure the mounting plate in the approximate area I want on the pedal board, then peel off the mounting tape cover, and then place the pedal down onto the tape/plate. This lets me get the precise position I want.

I printed this in ABS, but it's an extremely simple print that should work in just about any material. The files are oriented correctly for printing.

If you have any suggestions as to what sort of mounting tape works best, please share them in the comments. I find that the tape on the original Temple Audio plates is extremely hard to remove. 

As always, the original CAD source is provided in case you would like to remix the design or customize it for your needs. You can change the ‘hsize’ and ‘vsize’ parameters in the Fusion 360 design to control the size of the plate. Set them to small, medium, or large, to match the standard plate sizes available from Temple Audio, or set it to other integer values to make other sizes. You can set them to different values to make a plate with a different vertical and horizontal size. The ‘thickness’ parameter controls the thickness of the plate, for example, to make the large plate a little sturdier. 

Version 2 - Knurled Nut

v2: Added a knurled nut for those that prefer that. The F360 source is split into separate files to make it easier to edit (the knurled nut is very slow to edit due to the complexity of the geometry).

Version 3 - Flat Plates and Thumbscrew!

For those that have the ability to use heatset inserts, I've added a version of the plate that uses a heatset insert and a thumbscrew rather than a plastic threaded post that's part of the plate. This design is closer to that of the metal Templeboard plates, and it has the advantage that if the pedal is removed from the templeboard, it can sit flat on a surface. 

To assemble these, you will need some M4 x 6.3mm diameter x 4mm depth (or similar) heatsets. These are available from the CNCKitchen webstore or any of the retailers that sell the CNC Kitchen heatsets (for example, KB-3D).  McMaster Carr also sells some that are a little deeper, but should still work. To accomodate the depth of the heatset, I did have to make the plates thicker, and that's arguably the one downside to this over the alternative design.

The design includes a thumbscrew which is composed of a printed body into which a hex head screw is pressed. I am using these hex head, M4 screws from McMaster Carr, and a dab of super glue to prevent the screw from falling out, but the design can easily be tweaked to use other screws. 

Quad Cortex Mount!

I created a mount for my Quad Cortex which joins 4 of the plates together to allow you to align them easily and create a larger surface area to mount this large and heavy item.

Tags