Duet3D PanelDue 5i angled Case with integrated SD-Slot to mount on a 2040 Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Case to mount the PanelDue 5i by Duet3D on a 2040 Extrusion. It is angled to give the best view when…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a Case to mount the PanelDue 5i by Duet3D on a 2040 Extrusion. It is angled to give the best view when mounted. All buttons are accesible (reset; erase). The reset-button is easy to press and for the erase button, you will need a pen. I also integrated a hole to access the SD-Slot. (as the Panel is mounted with a little offset to compensate possible manufacturing tolerances it had to be designed a little wider than needed.) There are some extra holes at the back so you can secure the cable using zip-ties.
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Yes
Resolution:
0.2
30 %
Notes:
Support is only needed on the SD-Slot. Print it aligned with the front on the heatbed.
Category: 3D Printer Parts