Andrea Doria Hull V.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an updated version of my Andrea Doria hull.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 143
- Makes
- 2
- Views
- 805
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
There is an revised Hull part 9, it now has mounts for the motors.
I also provided an addon if you already have the part printed.
Gears and belt are also provided... the belt must be printed in TPU.
The main reason I made an updated hull is that the first one had an accident and broke, so I figured if I need to print a new one why not make it better.
I have made a shape that is more accurate to the original
(not saying it is 100% accurate, because its not 😉)
Part 1 and 11 are the most tricky parts to print and I would suggest a layerheigt of 0,2 or less.
All other parts are OK with 0,3 if you use a 0,6 nozzel (saves a lot of time)
The “Aft-deck” can be printed, but I made it with plasticard!
The darker parts is not included here… they are a part of the superstructure in the link below.
The intended scale is about 1/144 and the files below will fit fine, but you may have to make sizeadjustment in your slicer for an accurate fit. (print a testpiece first)
A superstructure and details that fits is available on Thingiverse by other authors.
Andrea Doria superstructure by Theidd - Thingiverse
Andrea Doria Details by LoneWolf-GER - Thingiverse
I used this propshaft for my build
Caldercraft Fine Line 7in Propshaft M4 Thread - Stainless Steel C4318 | Cornwall Model Boats