1 / 16
Riko 400 flash rig for Nikon camera
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Needed a camera rig for my flash as is a bit hard to hold, fits a Nikon remote trigger but for other cameras print a mirror of the other handle or adapt to your needs.
Will need 2 m4 threaded inserts for the bottom and i used m4 x 16mm bolts to hold the handles on along with some m2 x 16mm screws to hold the trigger in the handle.
T track size is in the picture with hole positions, or assemble then mark the holes where needed which might work out better.
Video of assembly is at https://youtu.be/nOnvlaRZJO8
Category: Camera