Scarf hanger with turnable hook
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.42 – €2.96 net (excluding VAT)
For file: Scarf-holder_0.2mm_PETG_MK3S_2h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.69 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A scarf holder for light, thin scarfs and buffs with a screwed-on turnable hook.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 153
- Makes
- 6
- Views
- 772
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
A scarf holder for light, thin scarfs with a screwed-on turnable hook. The hole diameter for the scarfs is 62mm.
Shopping list:
- 1x M3x18mm Screw
Print instructions:
- No supports required.
- The clearance in the hook is tight enough to directly screw into the hole without a nut.