1 / 30
Steadycam
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Glidecam inspired by the Devin Graham signature series
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Features:
- Adjustable head
- Movable gimbal
- Quick release plate
- Adjustable lenght
- Extendable base plate (when using a lasercutter)
The parts are 3d printed, but you will need some other part:
- 2 bearing (for in the arm) | Inner diameter: 5 mm | Outer diameter: 8 mm
- 2 bearing (for the grip you will hold) | Inner diameter: 8 mm | Outer diameter: 15 mm
- 1 bearing (for one the tubes) | Inner diameter: 25 mm | Outer diameter: 37 mm
- 20 mm diameter aluminium tube
- 15 mm diameter aluminium tube
- 110 mm long 5 mm thread + 1 normal nut and 1 seal nut ( for adjusting the head)
- 70 mm long 6 mm thread + 1 normal nut and 1 seal nut (for adjusting the head)
- 4 mm thread + 1 nut (for securing Quick release plate)
- 8 mm thread + 2 nuts ( for securing head on tube)
if you lasercut the bottom plate: -8x 6 mm threads + nut (can be wing nuts for easy of use or 3d printed nop)