1 / 3
Print-in-place ceramic capacitor organizer — image 1
1 / 3

Print-in-place ceramic capacitor organizer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Based on OpenSCAD print-in-place drawers

Rating
0 / 5
Likes
6
Downloads
50
Makes
0
Views
306
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

The ceramic capacitor organizer has 6 drawers, each with 5 compartments, of which 25 are pre-labeled with common values.   The dimensions are 240mm wide, 50mm deep, and 71 mm high.  Each compartment holds more than 100 ceramic caps.  The organizer can be attached to other organizers I designed with tie wraps as shown in the photos.

Resistor organizer: https://www.printables.com/model/983246-print-in-place-resistor-organizer

Electrolytic capacitor organizer: https://www.printables.com/model/986897-print-in-place-electrolytic-capacitor-organizer

This is the capacitor kit: https://www.dfrobot.com/product-431.html

The cabinet & drawers print all at once.  Import ceramic_caps.stl and ceramic_caps_text.stl simultaneously into the slicer if you want colored text.  ceramic_caps_no_labels.stl should be used if you want to make your own labels.

This model is based on my OpenSCAD model for parametric print-in-place drawers: https://makerworld.com/en/models/481479#profileId-397133