Lotus58 Case (High profile USBC)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tested with version usb-с v1.40, but should work with subsequent versions.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
For each half you will additionally need 18pcs m2 6mm screws and 5pcs m2 8mm spacers.
This is the version with the encoder on top. If you have the version with a nice!view, nothing there, or the encoder on the bottom, please edit the STEP file in any CAD software. Don't hesitate to create remixes!
Additionally, this version of the case doesn’t have holes for the reset and power switch buttons. I decided that I simply don’t need them.
It's worth noting that the keycaps are positioned quite close to the edge of the top part of the case, so your printer must be well-calibrated to prevent the keycaps from catching on the case. If you're unsure, it’s better to increase the gap between the keycap and the case.
PLEASE NOTE that the left and right side are not mirror copies! There is a difference between them in the form of the position of the usb-c hole.
Also, this case fits usb-c connector with 1.6 mid mount (shown in the picture). If you have a different mid mount distance, you need to change that in the step file.
Print Settings
Supports: Yes
Resolution: 0.16mm
Infill: 100% for bottom