First layer test 60x60 mm square / Z calibration
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.10 – €0.13 net (excluding VAT)
For file: firstlayer60x60mm_02mm_petg_mk3s_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 8.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-…
- Rating
- 4.932 / 5
- Likes
- 861
- Downloads
- 21,757
- Makes
- 80
- Views
- 36,822
- Reviews
- 118
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
First layer 60x60 mm square with 0.2 mm height
100x100 mm square
https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square
Print instructions
First gcode: PLA
Second gcode: PETG