Holey Silica Gel Container for Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vase mode silica gel desiccant holder for center of filament spool
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 83
- Makes
- 1
- Views
- 416
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Lots of holes for good airflow. Can sit in the center of spools in dryer boxes and bags. Lid has a C in the center and grooved edges for easy distinction of the top and bottom if printed in the same color. Provided 2 different heights. Short drum is 57mm tall with cap. Tall drum is 81mm. The Short drums print in about 17 minutes and the tall about 23. Using Print by Object you should be able to print multiples of the shorter files (Lid or short drum) on one plate.
Print settings used
Vase mode
PETG
.8mm nozzle
.4mm layer height
.72-75mm line width
Cap needs 4 bottom layers @ .4mm layer height. The drum needs 5.