Voxelab Aquila DTI holder for bed alignment
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.96 – €2.39 net (excluding VAT)
For file: PLA_ENDER3-Voxela.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.17 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 2.47 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
mount DTI to level your Voxelab Aquila
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 51
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
make sure your bed is clean before using it!!
print in PLA using support
you can freehand level your bed or use the g-code (it will move the hotend to 4 corners)
demo video
Gcode :
G28 ; home
G90 ; use absolute positioning for the XYZ axes
G1 Z30 F3600 ; move the z to clear to prob from the bed
G1 X9 Y58 Z9 F2400 ; point 1
M0 Click to continue
G1 X211 Y58 F2400 ; point 2
M0 Click to continue
G1 X211 Y220 F2400 ; point 3
M0 Click to continue
G1 X9 Y220 F2400 ; point 4