Seitliche Halterung Filamentsensor für Ender 3 V3 KE
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.79 – €0.97 net (excluding VAT)
For file: Halterung Bowden_0.2mm_PLA_MK3S_56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 55.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Seitliche Halterung, um den Filamentsensor von der Mitte nach links außen zu verlegen.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Gedruckt in PLA (0,2mm Speed Profil auf einem MK3S) mit 15% Infill.
Benötigt eine Verlängerung des Anschlusses von der Mitte des Druckers zur linken Seite.
Verbinder zum Teflon-Schlauch ist ein PC4-M10 Pneumatikverbinder (Bohrung 9mm).