Pixel 9 Pro XL Minimal Case (initial draft)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a simple 0.8mm thick case
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
NEW UPDATE FINAL VERSION \/\/\/
https://www.printables.com/model/991572-pixel-9-pro-xl-minimal-phone-case
Its not the strongest design, but it's thin ;-)
Printed in PETG, 0.12mm layer height, no support and 12mm3s flow. Should work fine in TPU but might slip off the phone. This might challenge your printers overhang tuning :-)
Snaps on rather snug with PETG, so to get it on you have to push out the last inside corner with your finger tip to get it onto the edge
Post processing; i would recommend is sanding the inside rim of the camera bezel and touching it up with a black marker to prevent glare. I did notice a bit of glare when i first put it on and did just that to fix the issue
*i could have made it “minimal-er” but it felt too fragile and the edge didn't feel right in the hand