1 / 4
Self watering planter "Spidey"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A medium self-watering pot which I call "Spidey". The diameter is about 130m
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spidey 😉
A medium self watering planter with a diameter about 130mm.
It is simple to print. You need support only for the cap and floating body. The floating body has to be filled up with styrofoam.
Reduce you print speed and print the outer pott with at least 5 walls to avoide leakage. Otherwise you can use a thin layer epoxy resin to tight it up.
If you like the planter you can support me by watching the video (german):
Used filament: Sunlu PETG