IKEA Tjusig like hanger, printable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
it is a little bit smaller, optimized for MK3/S/+ bed size
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable version of the popular hanger “IKEA Tjusig”
I have the original one but I'd like to make a smaller one for my daughter in different color. IKEA only has black, white and maybe natural wood. I optimized the size for MK3S/+.
For a 50cm tall wallhanger you need to print a left and right model. I uploaded fliped version or you can flip it in slicer. In my opinion the 0.3 layer is enough because it is a large model, looks good that layer height, and I saved more than two hour at the two part. I used 3,5x60 (PZ) screws for attaching to the wall. I made small plugs to hide the screw holes, the fits tight will not fall off. If yes, scale them to 101-102%
support: no
layer height: 0.3 (or 0.2 if you want better quality)
material: PETG (PLA also may work)
infill: min. 10%, cubic
walls: 3
top/bottom: 4