X-Endstop for i.E. "SV08 CN3D Shroud V3 by Nadir" or standalone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Save your Cables by using this X-Endstop holder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 67
- Makes
- 0
- Views
- 642
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
While i am someone that can't accept using things that could be better i modified a Idea to make it work better. It is not a Remix at all but by the Nature of it's beeing it looks like it and because i respect the simple Idea of other People i declare it “a Remix”.
I buildet it new from the scratch.
As i try to Install the original Endstop from Nadir's “CN3D Shroud V3” Set i've seen that the 2 Noses are not only biting into the Profile of you Toolhead. Because of there Position and the way you have to put the cable into the side holder of the toolhead the isolation of the cables get hadly scratched and presst.
So i used another Position for the noses and reworked the cable management for the Endstop and the Extruder cable. Now if you divide your extruder Motor cable in the middle to 2 lines beginning behind the endstop holder you will be able to put all 6 cables standing side by side into the gap and they go slight around the corner into the gap inside the Toolhead hole.
The little nose is only to make installers life easyer. It will bend but will hold the cable in place while you install it. I also decided to a deeper switch hole and wall management to better manage your cable from the switch and made a connection point between the toolhead and the lower hole to prevent it from bending by overtighten it by misstake. You will also be able to easyer get the switch out if you want remove it for reasons by using the bigger side hole to push it up. You dont need to pull on the lever.
I use m2x8 mm self taping screws to fix the switch to the holder. Dont use longer ones or you will kill your cables.
Put your Switch cables in from the side an than solder them to the switch. The switch cable is the first one that goes into the holder, than the to 2 divided extruder motor cable. As soon it is fixed you can start putting the cables one by one into the sideholder of the toolhead. I coverd the holder hole on the toolhead with a pice of aluminium tape because the cable of the switch is not connected to each other and a single cable comes out to easy from the holder.
Print it like it is positioned on the STL.
Use Tree Supports / Organic and you will get a smooth print with easy to remove supports.
I Print in PETG because no to high Temperatures there.
Line hight: 0.2
Walls and infill 0.4
3 walls 25% infill.
I reworked it a lot of times because of some thin walls you would get holes in your slice where no holes should be to the walls. With the upper stats you should not get holes in orca exept the ones that should be there. If you still see holes in the walls deactivate the option “detect small walls” under Structure in Orca slicer.
Hope anyone else will like it.