1 / 2
Colonel Wasp Firefly Pumpgrip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print upright. Smooth version requires supports
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
These pumpgrips were desigend to be compatible with an auxiliary priming bar.
Print 1x Spacer and 1x Pumpgirp. The spacer goes between auxiliary priming bar and the ram (see 2nd picture)
BOM:
6x M3x8
2x M3x12 or M3x15 (both should work)
8x M3x5.7 heat inserts
I used these: https://www.3djake.ch/en-CH/ruthex/threaded-insert-m3-100-pieces
feel free to print or machine the auxiliary priming bar. Technical drawing is attached in the files