1 / 1
Clothesline Hanger pulley
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a support hook for long clotheslines
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a support for a clothes line. use these as needed when hanging your laundry to prevent sagging. the pulley makes it very easy to move the clothesline
required parts:
- 608 bearing
- 3/8" (8mm) threaded rod
to build print both parts and press a 608 bearing into the pulley (it's designed to be a tight press fit) then align the pulley in the main body and thread the 3/8" rod through the holes. the rod should cut it's own threads.
once the axle is fully inserted use a hacksaw to cut the threaded rod flush with the main body.
I printed in ASA but PETG would work too. I wouldn't recommend PLA