1 / 7
Zodiac Phaetus BMO Dragonfly Hotend Extruder Parts for Prusa MK3S+ — image 1
1 / 7

Zodiac Phaetus BMO Dragonfly Hotend Extruder Parts for Prusa MK3S+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extruder parts needed when converting to a Zodiac Phaetus BMO Dragonfly Hotend on a Prusa MK3S+.

Rating
4.5 / 5
Likes
18
Downloads
152
Makes
1
Views
2,412
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

These files will help when converting from the standard E3D Hotend to the Zodiac Phaetus BMO Dragonfly hot end on a Prusa MK3S+.  Note this is not for a regular Phaetus BMO Dragonfly due to the addition of an anti-rotation feature near the top (flats) on the Zodiac version.  The standard Phaetus doesn't have this and won’t fit. 

These are not my designs. They were created by FW3Dde, and the original files are located at the link below:

https://www.thingiverse.com/thing:4931851

 

I printed all of the attached extruder parts in Prusament PC Blend Carbon Fiber (using a Zodiac3D hardened nozzle) but you should first print a replacement fan shroud before any other parts since it is the closest to the hotted and can be the first part to fail/melt when printing with the PC Blend at 285C.  Replace the fan shroud, and then print the balance of the parts.  

While I absolutely love Prusament PC Blend Carbon Fiber and it's print quality/performance has been outstanding, the extrusion multiplier settings are very important as the material is not forgiving when overextruded (material has very little flex/give).  If parts are over extruded, holes and spaces for the captured nuts will be too small and parts will not fit correctly.  Take your time to dial in your settings by printing test samples.  

Recommended Settings: 

  • 0.4 mm nozzle
  • 0.2 layer height
  • 30% infill (grid)
  • No supports
  • No raft or brim

Filament Specific Settings:

  • 285C Nozzle Temp
  • 110C Bed Temp, First Layer
  • 115C Bed Temp, Other Layers
  • .90-.93 Extrusion Multiplier

Tags