1 / 1
Simple Sturdy BIG Spoolholder for 3kg spools
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This can hold 3kg spools from eSun and 2.3kg from add:north. Hardware optional and thus all parts printed.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 198
- Makes
- 0
- Views
- 903
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Print area of at least 290x290mm needed!
Print settings: Optional layer height but 0.2 works fine. 4-5 perimeters, 10-20% infill, at least 0.6mm top and bottom.
Print one pipe, two sides and two fronts. Assemble and print some more.
You can optionally use four M3x18 screws and four M3 nuts.
Hexnuts or squarenuts, both work.
Fusion 360 and STEP files included.