Cobra 6S Quickplug Cover

I have a mix of quickplug slats and wanted matching cases for each size.  This is sized down and ready to print for the Cobra 6S series and parallel quick plug slats.  The board is designed to be mounted with M3 screws in this upload, though you can easily edit the parameters of the ..f3d if you want to use different sizes. (I used Ruthex insert nuts in my own, but uploaded these to tap into the plastic for ease of use.)  Also, you can customize to add your own logo in Prusaslicer or Fusion 360 if you like.  My demo pictures have my handle in them, but I did not include those in the print files as I'm sure no one wants to see my name in their print. ;)

The cover is printed at 100% infill, as the default print settings only had 1 infill layer between top and bottom layers, so it actually takes longer to do a single infill at 30% than to print at 100% infill overall.  The base is 30% infill, with modifiers to print additional solid areas around the mounting screws, as well as 100% infill on the top walls that stick above the main body for extra strength.  PLA may work, but I highly recommend PETG since these will be outside and subject to mild abuse by most in the field.