Pogopin holder for ISP-Programmer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder, to quickly connect a ISP-Programmer to a custom PCB via 2x3 Pogo pins.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A simple holder, to quickly connect a ISP-Programmer to a custom PCB via 2x3 Pogo pins. The pins have 2.54mm spacing and the wires are soldered directly to the Pins. the overhang has a angle of 45 degrees, to keep it printable without support. I printes in in PLA but any rigid Material should be useable.
It is screwed to a gh-201-b toggle clamp. I removed the handle an just move the lever manually, as shown in the Pictures. The orange part ist a cutom holder for a PCB, which is not public. You will have to make your own holder for your usecase.