Open Source FPV Drone Frame project initiated by Team BlackSheep Source One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open Source FPV Drone Frame project initiated by Team BlackSheep Source One
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 655
- Makes
- 1
- Views
- 3,337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
# Printable TBS Source One V5
## donate if you like
https://www.paypal.com/donate/?hosted_button_id=A7VXNLCXZHPJ8&sdkMeta=eyJ1cmwiOiJodHRwczovL3d3dy5wYXlwYWxvYmplY3RzLmNvbS9kb25hdGUvc2RrL2RvbmF0ZS1zZGsuanMiLCJhdHRycyI6eyJkYXRhLXVpZCI6IjFlYTg2ODQ0NjlfbWR1Nm50aTZtanUifX0&targetMeta=eyJ6b2lkVmVyc2lvbiI6IjlfMF81OCIsInRhcmdldCI6IkRPTkFURSIsInNka1ZlcnNpb24iOiIwLjguMCJ9
## SO_V5
mixed frame files to be printable
credit: TBS -- https://github.com/tbs-trappy/source_one
print details: PETG - 0.24mm -- 4 wall loops -- 4 top shell layers -- 4 Bottom shell layers -- 30% sparse infill Density
mount details: front standoff 35mm -- back standoff 25mm
## Runcam
stl file to mount runcam
credit: Sebastian Birkenberger -- https://www.printables.com/fr/model/324795-tbs-source-one-v5-runcam-thumb-mount
credit: CostaFPV -- https://www.thingiverse.com/thing:5779689/files
print details:
mount in TPU - 0.24mm -- 4 wall loops -- 4 top shell layers -- 4 Bottom shell layers -- 30% sparse infill Density
support in PETG - 0.24mm -- 4 wall loops -- 4 top shell layers -- 4 Bottom shell layers -- 30% sparse infill Density
## Add_Frame
mixed TBS Source one v5 frame reinforcement for 3mm plates
credit: der_Samu3l -- https://www.printables.com/fr/model/613913-tbs-source-one-v5-frame-reinforcement/files
print details: PETG - 0.24mm -- 4 wall loops -- 4 top shell layers -- 4 Bottom shell layers -- 30% sparse infill Density